ELECTROLUX-REX PX960DUV Manuale Utente Scaricare il pdf (Pagina 9)

water and dry them carefully before you

put them back.

• Wash stainless steel parts with water,

and then dry them with a soft cloth.

• The pan supports are not dishwasher

proof. They must be washed by hand.

• The enamel coating occasionally can

have rough edges, so be careful when

you wash the pan supports by hand

and dry them. If necessary, remove

stubborn stains with a paste cleaner.

• Make sure you position the pan sup-

ports correctly after cleaning.

• To make the burners work correctly,

make sure that the arms of the pan

supports are in the centre of the burner.

•

Be very careful when you replace

the pan supports to prevent the hob

top from damage.

After cleaning, dry the appliance with a

soft cloth.

Removing the dirt:

1.

– Remove immediately: melting

plastic, plastic foil, and food con-

taining sugar.

–

Stop the appliance and let it

cool down before you clean: lime-

scale rings, water rings, fat stains,

shiny metallic discolorations. Use a

special cleaner applicable for sur-

face of hob.

2.

Clean the appliance with a damp

cloth and some detergent.

3.

At the end rub the appliance dry

with a clean cloth.

The stainless steel can become tarnished

if it is too much heated. Refer to this you

must not cook with potstones, earthen-

ware pans or cast iron plates.

6.1 Cleaning of the spark plug

This feature is obtained through a ceramic

ignition candle with a metal electrode.

Keep these components well clean to

prevent difficult lighting and check that the

burner crown holes are not obstructed.

6.2 Periodic maintenance

Periodically speak your local Service

Force Centre to check the conditions of

the gas supply pipe and the pressure ad-

juster, if fitted.

7. TROUBLESHOOTING

Problem Possible cause Remedy

There is no spark when

lighting the gas

• There is no electrical

supply

• Make sure that the unit

is connected and the

electrical supply is

switched on.

• Control the fuse. If the

fuse is released more

than one time, refer to

a qualified electrician.

• Burner cap and crown

are placed uneven

• Make sure that the

burner cap and crown

are in correct positions.

ENGLISH 9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Commenti su questo manuale

Nessun commento